patient monitor USA Brand ECG,NIBP,SPO2,RESP,TEMP,PULSE RATE, IBP and CO2 etc. parameters are optional.

patient monitor

15.1″ high-resolution color LCD to display patient’s ECG waveform, respiratory waveform and SpO2 cubage waveform;Battery power indicator, which enables real-time battery power detection and displays the battery power.Intuitionistic and easy calculation. Medical consistent calculation and analysis can accurately figure out the speed of medicine supply and dose, to observe the relation between amount and effect indirectly.Convenient and applied accessorial hemostatic function, according to patient’s condition, different hemostatic cuff pressure can be set.Automatic analysis of 20 arrhythmia waveforms and VPC, waveform freezing function and automatic ST segment measurement and manual analysis;“8/24/120 hours” trend analysis function, under working status, up to 120 hours statistic data of ECG, TEMP, SpO2, RESP, IBP and NIBP etc. trends;100 groups of arrhythmia cases’ data and the corresponding ECG, TEMP, SpO2, RESP and pulse value of each case;Storage and recall of a list of 500 groups of NIBP measurement data, as well as heart rate, body temperature, respiratory rate and SpO2/pulse rate when the measure of blood pressure is taken;8-hour permanent ECG data recall (depending on system capacity);Unique file management, which enables recording, modifying, deleting and saving operation of patient’s information;Displays heart rate trend, SpO2 trend, respiration trend or waveform simultaneously on oxyCRG, to know the instantaneous condition change of neonate;High precision NIBP measuring module, good repeat capability;Software and hardware-dual excess air pressure protection function;Special SpO2 measuring device, which ensures the accuracy of SpO2 and pulse rate measures;Multiple interface monitoring, which enables simultaneous monitoring of several ECG waveforms;Precise alarm system, different alarm events adopt different alarm degrees; 3 degrees visual and audible alarm function;Flexible high and low alarm limits setting function;Easy to Color-code and change the color of the font, background and waveforms if needed;Cardiac pacemaker restraining function enables to be used along with cardiac pacemaker;Resistance against defibrillator and electrosurgical knife interference;Blood pressure may be measured in the mode of “adult/infant/neonate”, which may be selected via the menu, to better suit the adult, infant and neonatal patient;Built-in printer (optional) to output waveforms and text;Networking with the central station as a part of the central network;IBP and CO2 etc. parameters are optional.

patient monitor NeuVision 800