Ads by Google
BHY Series Explosion Proof Front Access Fluorescent Fitting (IIC)
Application1 Designed for explosive atmosphere Zone 1, Zone 2 |
2 Designed for Groups IIA,IIB,IIC |
| Temperature classes T1~T5 |
| 3 Designed for petroleum exploitation, refinery, storage, chemistry, medicine, military and military facilities etc.sites with potential explosive atmosphere. |
1 Compliance with:GB 3836.1,GB 3836.2,GB 3836.3,IEC60079-0,IEC60079-1,IEC60079-7 |
| 2 Explosion protection: ExedIICT5 |
| 3 Rated voltage:AC 220V |
| 4 Tube options:T10 single-pin instant start tube(1*20W,2*20W,1*40W,2*40W) |
| 5 T8 Bi-pin tube(1×18W,2×18W,1×36W,2×36W) |
| 6 T5 Bi-pin tube(1×14W,2×14W,1×28W,2×28W) |
| 7 Ingress Protection: IP65 |
| 8 Corrosion Resistance:WF1 *WF2 |
| 9 Cable entries specification: G3/4 |
| 10 Cable’s outer diameter:Φ9mm~Φ14mm |
| 11 Charging time:≤24h |
| 12 Emergency start time: ≤0.3s |
| 13 Emergency lighting duration:≥90min |
Model | Tube | Power (W) | Luminous Flux (lm) | Lamp holder | Ballast Type | Explosion Protection | Ingress Protection |
BHY-1×20 | T10 Single-pin fluorescent tube | 20 | 760 | Fa6
| Electromagnetic
| ExedIICT5 | IP65 |
BHY-2×20 | 40 | 1520 | |||||
BHY-1×40 | 40 | 2000 | |||||
BHY-2×40 | 80 | 4000 | |||||
BHY-1×18E | T8 Bi-pin fluorescent tube | 18 | 1150 | G13
| Electronic
| ||
BHY-2×18E | 36 | 2300 | |||||
BHY-1×36E | 36 | 2850 | |||||
BHY-2×36E | 72 | 5700 | |||||
BHY-1×14E | T5 Bi-pin fluorescent tube | 14 | 1350 | G5
| Electronic
| ||
BHY-2×14E | 28 | 2700 | |||||
BHY-1×28E | 28 | 2900 | |||||
BHY-2×28E | 56 | 5800 |
1 Enclosure is bended of sheet steel with high voltage electrostatic powder coated surface. |
2 Stainless steel enclosure is available as per request with polished surface. |
| 3 Enclosure and frame are of built-in chain connection structure , internal reflector is turnable, easy to wiring. |
4 Fasteners is of against dropping type to facilitate opening maintenance work. |
5 Special double seal structure with strong water resistance and dust resistance property. |
6 Built-in encapsulation ballast with reliable explosion protection property. |
7 Name brand fluorescent tube with long service life and high lighting efficiency. |
8 It will be shafted to emergency status when normal power failure. |
9 Special designed over charging and over discharging protection circuit inside emergency unit. |
10 Polycarbonate lens for ceiling type and recessed 1 type. |
11 Toughened glass lens for recessed 2 type. |
12 Recessed 2 type with less outer parts after recessed mounted to save the room effectively. |
BHY Series Explosion Proof Front Access Fluorescent fitting/lamp/light(IIC)