1. LED POWER SUPPLY. UL No. E336008 2. ALUMINUM SHELL. LITLLE SIZE 3.OVERLOAD/ OVER CURRENT/ OVER VOLTAGE PROTECTION Features : Constant voltage design Universal AC input / Full range Epoxy encapsulated with IP67 level Withstand 300VAC surge input for 5 seconds Protections: Short circuit / Overload / Over voltage Fully isolated plastic case Cooling by free air convection UL1310 Class 2 power unit, pass LPS 100% full load burn-in test Low cost, high reliability Suitable for LED lighting and moving sign applications 2 years warranty

SPECIAL FEATURES					ELECTRICAL SPECIFICATIONS
l UL879 Class 2 recognized, pass LPS					Input range		90-264VAC Full range
l Constant voltage design					Frequency		47-63Hz
l Universal AC input / Full range					Input Voltage		AC120V
l Epoxy encapsulated with IP67 level					Output Voltage		DC12V/ DC24V
l Withstand 300VAC surge input for 5 seconds					Output Current		5A / 2.5A
l Protections: Short circuit / Overload / Over voltage					Output power		60W
l Fully isolated plastic case					Inrush Current(max.)		25°C cold star,60A at 230VAC
l Cooling by free air convection					AC Current		±1%
l 100% full load burn-in test					Load Regulation		±6%
l Low cost, high reliability					Ripple&Noise		1%
l Suitable for LED lighting and moving sign applications					Effiency		86%
l 2 years warranty					Leakage Current		0.25mA/240VAC
ENVIRONMENTAL					Hold up Time		500ms/230VAC,16ms/115VAC
Operating Teperature:		-30 to 70°C					at full load
		De-rating:1%per °Cfrom50°C			Protection		Over-voltage, Over-current
Humidity		20%~90%(RH-Nondensing)					and short circuit
Storage temperature		-40 to 80°C, 10-95%RH					protection: Auto-recovery
Temp.conefficient		±0.03% per °C(0~50°C)			SAFETY
Vibration Frequency		10~500Hz			UL		UL 879 class 2certified E333976
(2G 10min/ 1 cycle, period for 60min,each long X,Y,Z axes)					CE		Certified
MTBF		732Khrs min MIL-HDBK-217F(25°C)
EMC		Compliant to EN55022(CISPR22)class B. Compliant to EN61000-3-2,-3,
		Compliant to EN61000-4,2,3,4,5,6,8,11;ENV55024,light industry level, Criteria A
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf
parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltage. Please check the derating curve for more details.
5. The power supply is considered a component which will be installed a final equipment. The final equipment must be
re-confirmed that it still meets EMC directives.
6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the
set up time.

( function(){ var aBigImageSrc = [ 'http://i00.i.aliimg.com/photo/v2/328640124_1/60W_LED_power_supply.jpg' , 'http://i00.i.aliimg.com/photo/v2/328640124_2/60W_LED_power_supply.jpg' , 'http://i00.i.aliimg.com/photo/v2/328640124_3/60W_LED_power_supply.jpg' , 'http://i00.i.aliimg.com/photo/v2/328640124_4/60W_LED_power_supply.jpg' , 'http://i00.i.aliimg.com/photo/v2/328640124_5/60W_LED_power_supply.jpg' , 'http://i00.i.aliimg.com/photo/v2/328640124_6/60W_LED_power_supply.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); 60W LED power supply