finest classifying 3.5um 1 ton per hour ball mill working with 5-6 air classifiers big output 3-45 um low energy consumption

The ALPHA air classifiers have been developed for the production of fines from 5 -150 μm.

1. Cut point down to d98 < 6 μm2. Extremely reliable design3. Low specific energy consumption4. Low investment costs5. Easy and quick maintenance resulting in low maintenance cost6. For abrasive products: Ceramic rotor and ceramic lining / polyurethane lining7. Stainless steel design available

The TFS classifiers have been designed to produce ultra-fine products down to d98<2 μm on an industrial scale at a highly competitive energy consumption compared to alternative process technologies.

1. Cut point down to2. Very sharp cut points at highest yields3. Production of ultra-fines (nanoparticles) on an industrial scalewhich in the past was only by wet processing and drying.4. Return of investment in very short time.5. Highest throughputs on the market, for example atd98<3 μm on calcium carbonate – 1.000 kg/h (TFS 510/2)6. Rotor with hybrid-design makes the classification morereliable7. Low maintenance costs and easy maintenance8. Double discharge reduces pressure loss and safes energycosts by over 40%9. Dynamic air sealing adapted to rotor speed minimizes riskof oversize contamination (< 5 ppm at 25 μm)

air classifier