1.Voltage:DC12-40V 2.Current:0.1~4.0A/phase 3.Suit for 2 phase step motors size 42~60mm 4.Max Resolution 40000steps/r

 Description:

      SEA2D44 is a microstep motor driver with the same angle and constant torque, driver voltage DC12-40V supplied by single power and current under 0.3A (6 or 8 wires), which is suitable for 2 phase hybrid stepper motors with diameter 42-60mm models.

Advantages and Selling Point

High Performance, Low Noise, Good StabilityFactory Direct PricesFine QualityDelivery On TimeGood Communication Sales TeamGood Service

Features and Specifications

Microstep 12/8 selectable .The max resolution up to 40000 stepsPulse Input Frequency up to 200KHzDrive Current from 0.1A~4.0AVoltage ranges: DC12-40V (the best input DC36V )Dimentions:136*92*25(mm) Weight:0.3kgError Protection: overheated, over-current,  low-voltage    Special Control CircuitOptically Isolated Signal I/O Bipolar constant current chopping mode

Applications

Engraving machine, Labeling machine, Spray painting machine, Embroidery machine, Medical equipment, Metallurgical furnace, Semiconductor equipment etc.

Microstep Setting Table

Pulses/rotation	800	3200	6400	12800
D4	ON	OFF	ON	OFF
D3	ON	ON	OFF	OFF
D2	NULL
D1	NULL

stepper motor drive for 2 phase motor