1.Introduction Video of Okay Energy Equipment Co.,Ltd:
2.Principles of Oxyhydrogen Welding Machine
Okay Energy Oxyhydrogen Welding Machine adopts patented technology to electrolyze water to H2 and O2, then output the gas to welding torch through safe device, fire them to form Oxyhydrogen flame, weld enameled wires precisely and fast. There is no gas bottle and it can eliminate paint leather automatically. As a result, oxyhydrogen welding machine can save energy by 30% and increase efficiency by 20%.
3.Advantages of oxyhydrogen welding machine
Okay Energy Equipment Co.,Ltd is the first factory which has invented Oxyhydrogen Welding Machine. Our products have been used by more than five hundred enterprises worldwide. Most of them are listed company in domestic and overseas, such as
LEO, SEW motor (Germany) and so on.
1) The gas used in welding is made as needs, the oxyhydrogen welding machine turns on to produce gas, supply gas with
low pressure, shutdowns the oxyhydrogen welding machine to stop producing gas, there is no gas storage.
Therefore, there is no danger of explosion. At the same time, both of the oxyhydrogen welding machine and welding torch
have built in flashback arrestor device, so oxyhydrogen welding machine is 100% safe.
2) The flame material comes from water and turns back to water again(invisible water vapour disappear in air)after combustion,
there is no harm for people and environment.
3) Oxyhydrogen flame temperature is up to 2800 degrees, the flame is concentrated and increases welding speed by 20%.
4) Oxyhydrogen welding machine burns up the surface paint leather automatically and decreases the remove paint
leather process before welding.
5) Oxyhydrogen welding machine can work 24 hours continuously, so it is reliable and stable.
6) Oxyhydrogen welding machine is suitable to weld two pieces or several pieces of different diameter enameled wires, and it can be applied widely.
7)There are several safety protection devices to be built in, so oxyhydrogen welding machine is safer than other welders.
4.Models of Oxyhydrogen Welding Machine for Welding Enamelled Wires
Max. Gas Output
Suitable Enameled Wires
2 pcs of 0.35mm
2 pcs of 0.50mm
several pcs of 1.0mm
several pcs of 2.0mm
Several pcs of thicker than 2.0mm
One machine for several torches
5. Remarks of Oxyhydrogen Welding Machine
Due to different motors from different factories, the diameter and quantity of enameled wires are also different. There is no any uniform standard, so please contact with us while you choose the models, we will give you a professional selection reference as your requirement.
6. About Okay Energy Technology
Okay Energy Co., Ltd specializes in research, manufacturing oxyhydrogen welding machine, oxyhydrogen cutting machine and other oxyhydrogen generators, owned many patents.
1) Patented Integration of Water Electrolysis Cell FormingOur electrolysis cell Integration is used in Large Module in order to make sure No Leakage, Explosion-proof,
and Long Life Cycle.
2) Patented Electrolysis Power Supply based SCM Our Power Supply is special designed for Electrolysis.For example: 2.1 Constant current control by temperature feedback control 2.2 Current adjust by user to meet the constant flux of oxyhydrogen gas 2.3 Efficient energy conversion(AC TO DC) based IGBT 2.4 Special cooling design for working 24 hours continues.
3) Patented Multi-layer ANTI-FIRE Water Seal Technology Water Seal Device is important unit of oxyhydrogen welding machine, this unit is designed for backfire-proof, It works 100% ok.
4) Automatic Water Level Detection Technology We design by ourselves, oxyhydrogen welding machine is used for detect the water level of the electrolysis cell and
water-deposit tank. When water is too low, the alert lamp is light. When water is lowest, the power supply switches off to
proof the oxyhydrogen welding machine.
5) Water Automatic Replenishment TechnologyWhen water of the electrolysis cell is too low, the system will auto pump water from water-deposit tank.
6) High-efficiency Gas Water Separator TechnologyThis Technology is used to separate the water from gas in order to ensure the gas is pure. If the oxyhydrogen gas has some
water even little, the temperature of the oxyhydrogen flame will become lower.
7) Electrolyte -Automatic Cycle TechnologyWe used static way to realize Electrolyte Cycle, don't used pump because the pump is a mechanic unit that is easily damaged.
Oxyhydrogen Welding Machine / hho welding machine / hho welder / water welder / welding torch / water welding machine