Ads by Google
HD-52-A1 Full-automatic Edible Oil Bottle Blow Molding Machine
Main Features: 1 Adopt automatic transmission control method to reduce staff, reduce costs, improve quality and profit.
and increase profits provide a guarantee. 2, We used imported man-machine interface control to make sure it has performance accuracy, strong stability, easy operation.
3, Detection devices made of imported components, high control precision, fast response.
4, We adopted infrared lamp heat, so the penetration, uniform heating, 40% electricity savings. The reflector width and height can be adjusted for different structures of the performs can be heated.
5, With automatic alarm and automatic fault detection to determine function.
6, We chose and used Germany, Japan, Taiwan, Korea, pneumatic components to make sure our product with high sensitivity and switching speed, low failure rate, safe and reliable operation.
7, The air route design: Action and blowing into two parts, to meet the blow, the action of different air pressure requirements for high pressure blowing products.
8, The unique clamping structure has strong clamping power. It is smooth, fast opening and closing mold, easy installation and replacement for mould.
9, The most critical is that we have a good after-sales service.
item | HD-52-A1 |
Cavities | 2 |
Container Volume | 5L |
Clamping stroke | 190mm |
Mold thickness | 200mm |
Stretching stroke | 450mm |
Theoretical output | 1200bph |
Container diameter | 80-165mm |
Container height | 50-410mm |
Neck range size | 32-68mm |
Electrical volume | 380V/50-60HZ |
Total power | 32kw |
Working pressure | 20kw |
Blow pressure | 8bar |
Low air consuming | 30bar |
Low air consuming | 1.2m3/min |
High air consuming | 1.5m3/min |
Water Consuming | 20-30L/min |
Size(LXWXH) | 4.8m*1.6m*1.8m |
Weight | 2500kg |
Pass rate | >=99.8% |
Main configuration:
Japanese SMC and Taiwan AIRTAC cylinder, valve, Parker blowing high-pressure valve, Canada Intervet computer control system and infrared temperature control. Electronic eye automatically detected,automatic alarm. (Patent blowing method, replacing of the mould only need 15 minutes). Machine designed to automate the entire computer-based.
HD-52-A1 Full-automatic Oil Bottle Blow Molding Machine