Laminating film thickness 24-45 aam Laminating film type OPP, PET, Nylon Laminating roll heat up time Approximat (25-100 C) Thermal laminator ideal for processing small orders up to B3 sheet sizeCompact solution based on the well known FENGMING conceptSuitable for digitally printed outputApplication: low volume jobs; occasional on-demand jobsOutput: 2800 A4 sheets/hour (basic variant); 3000 A4 sheets/hour (top feeder)

Lamination section:

Smooth film unwinding using mechanical brake; a distribution roll prevents folds on the filmThe laminating cylinder is fast dry heated (IR heater)Advanced regulation of the laminating temperature → precise temperature control, no film overheatingThe sheet overlap is electronically adjustable, even while the machine is running → easy to operate and precise solutionKey operation parameters are entered via a touch screen → fast and comfortableForced air cooling of counter pressure cylinder → to be used with digital prints

Technical specifications:

Maximum designed lamination speed	35 m/min
Minimum sheet dimensions	20 × 20 cm
Maximum sheet dimensions	A1
Paper weight	115-350 gm²
Laminating film thickness	24-45 μm
Laminating film type	OPP, PET, Nylon
Laminating roll heat up time (25-100 °C)	Approximately 10 min; **18 min
Recommended laminating temperature	135°C (depending on film type)
Machine dimensions, including. the unloading table (L × W × H)	187 x 166 x 183 cm
Required input	3.8 kVA; **5.8 kVA;  50 Hz
Maximum pressure force	11.5 kN
Maximum linear nip pressure	33.8 N/mm

BOPP THERMAL FILM LAMINATING MACHINE FOR A1PAPER