ACSR Conductor 1 Material:Aluminium and Galvanized Steel . 2 Strandard: IEC61089, BS215 part2, ASTM B232, DIN48204, BS EN50182

ACSR Conductor(Aluminium Conductor Steel Reinforced)

1 DescriptionACSR is a composite conductor consisting of seven or more aluminium and galvanized steel wires built up in concentric-lay-stranded layers. The centre core is of galvanized steel and outer layer or layers of aluminium. The steel core may be single wire or stranded wires depending on the size.When required, the interstices of the inner layers can be filled by grease compound which is more suitable for the operating conditions of the conductor.

2 ApplicationACSR is widely used in overhead electric power transmission and distribution lines with various voltage levels. ACSR provides optimal strength for line design. Variable steel core stranding enables desired strength to be achieved without sacrificing ampacity.

3 Manufacturing StandardsGB/T 1179-2008, IEC 61089, EN 50182, DIN 48204, BS 215 Part 2, ASTM B232, NF C 34-120 or as required.

ACSR Technical Characteristics Based on Standard BS 215-2
Code name	Nominal aluminium area	Stranding and wire     diameter		Sectional area of aluminium	Total sectional area	Approx. overall diameter	Approx. mass	Calculated D.C. resistance at 20oC	Calculated breaking load
		Al	Steel
	mm2	No./mm		mm2	mm2	mm	kg/km	Ω/km	kN
RABBIT	50	6/3.35	1/3.35	52.88	61.7	10.05	214	0.5426	18.35
DOG	100	6/4.72	7/1.57	105	118.5	14.15	394	0.2733	32.7
WOLF	150	30/2.59	7/2.59	158.1	194.9	18.13	726	0.1828	69.2
DINGO	150	18/3.35	1/3.35	158.7	167.5	16.75	506	0.1815	35.7
LYNX	175	30/2.79	7/2.79	183.4	226.2	19.53	842	0.1576	79.8
Technical Characteristics Based on Standard BS EN50182
Code name	Areas			No. of wires and   wire diameter		Conductor diameter	Linear mass	Rated strength	D.C. resistance at 20oC
	Al	Steel	Total	Al	Steel
	mm2	mm2	mm2	No./mm	No./mm	mm	kg/km	kN	Ω/km
FOX	36.7	6.11	42.8	6/2.79	1/2.79	8.37	148.1	13.21	0.7812
BEAR	264.4	61.7	326.1	30/3.35	7/3.35	23.5	1213.4	111.5	0.1093
SHEEP	375.1	87.5	462.6	30/3.99	7/3.99	27.9	1721.3	156.3	0.0771
Technical Characteristics Based on Standard DIN 48204 / DIN EN50182
Code name	Areas			No. of wires and   wire diameter		Conductor diameter	Linear mass	Rated strength	D.C. resistance at 20oC
	Al	Steel	Total	Al	Steel
	mm2	mm2	mm2	No./mm	No./mm	mm	kg/km	kN	Ω/km
50/8	48.3	8.04	56.3	6/3.20	1/3.20	9.6	194.8	16.81	0.5939
95/15	94.4	15.3	109.7	26/2.15	7/1.67	13.6	380.6	34.93	0.306
120/20	121.6	19.8	141.4	26/2.44	7/1.90	15.5	491	44.5	0.2376
240/40	243.1	39.5	282.5	26/3.45	7/2.68	21.8	980.1	85.12	0.1188
300/50	304.3	49.5	353.7	26/3.86	7/3.00	24.4	1227.3	105.09	0.0949
550/70	549.7	71.3	620.9	54/3.60	7/3.60	32.4	2077.2	166.32	0.0526
Technical Characteristics Based on Standard ASTM B 232
Code Words	Size	No. of wires and   wire diameter		Approx. overall diameter	Linear mass	Rated Strength			Calculated D.C. resistance at 20oC
		Al	Steel			ACSR/GA	ACSR/GB	ACSR/HS
	AWG / kcmil	No./mm	No./mm	mm	kg/km	kN	kN	kN	Ω/km
Sparrow	2	6/2.67	1/2.67	8.01	135.8	12.67	12.27	13.38	0.8542
Pigeon	3/0	6/4.25	1/4.25	12.75	344	29.44	28.51	31.8	0.3372
Penguin	4/0	6/4.77	1/4.77	14.31	433.3	37.14	35.94	40.07	0.2677

ACSR Conductor(Aluminum Conductor Steel Reinforced)