Water Pump Controller Voltage:110-120V/220-240V Adjustable Pressure Setting:1.0-3.5Bar

Water Pump Controller

The Electronic Controller orders the automatic start and stop of the water pump when opening or closing any tap or valve of the system. The controller can keep constant pressure and water flow in the system as long as any tap in the system is open during the pumps operation. Voltage: 220 - 240V / 50Hz Maximum Current: 10 Amp Restarting Pressure: 1.0 Bar to 3.5 Bar Maximum working Pressure: 10 Bar Connection: 1" / 25mm Protection Rating: IP 65 Maximum Temperature Rating: 60°C Manual Start Switch RESET Tension LED POWER Pump Working LED ON Security System LED FAILURE Special Non Return Valve to avoid surges Security System removing the possibility of the machine working without water

Automatic Water Pump Controller