Ads by Google
Your Complete Tire Retreading Needs-Complete set of retreading equipments and the rubber materials.1.Tire Retreading Machines2.Rubber Material Supplies3.Retreading Solutions,good service
Why retreading:
Retreading is a safe, efficient and environmentally friendly way to breathe new life into worn tyres: The "worn-out" tread of the tyre is replaced with a brand-new one and this means that the tyre can be used again!Unfortunately, however, not every tyre can be retreaded. The requirements are:*The tyre was used correctly in its "first life", driven with the right air pressure and treated with care. * The tyre's frame, the carcass, is not seriously damaged.
In addition, whether a retreadable carcass can be reused depends on the type of tyre. The following retreading limits apply:* Car tyres: 1 time * Light truck tyres: Generally 1 time * Truck tyres: 1 to 3 times * Aircraft tyres: Up to 12 times
There are two techniques for retreading:Hot retreading or Precure "cold" retreading.
The benefits of retreading are that it is both environmentally friendly and cost-efficient!* When the tread has worn off, only about 20% of the tyre is used up. The carcass, which represents about 80% of the tyre's value, can be re-rubberised for a "new tyre life". * To produce a truck or bus tyre requires about 60-80 kg of rubber mixture. Retreading the tyre takes only about 15 kg of rubber. A considerable amount of raw materials can therefore be saved. In the EU, this equates to more than 300,000 tonnes per year! *To produce a car tyre requires about 28 litres of crude oil. To retread a car tyre, on the other hand, only 5.5 litres of oil are needed.
Jinhui Retreading Equipments available from JH04,JH06,JH08,JH10,JH12 till JH22,JH24 capacity.
Tire sizes available: Truck tire and bus tire 650-1200(16'',20''.22.5'',24''),OTR available
Should you have any inquiry ,feel free to contact at our sales.
Complete Precure Tire Retreading Machines