1.35W switching power supply 2.CE Approved,100% burn-in test 3.Competitived price,shortest lead time 4.Samples availbale

1.        Competitived price and high reliability

2.        105oC Output capacitor

3.        AC input power suitable for the world

4.        High efficiency and low operation temperature

5.        Soft-start current can reduce the AC input impact effeciticly

6.        With short-circuit and overload protection

7.        Compact size, light weight

8.        100% full-load burn-in test

9.        Installed with EMI filter, minimum wave

 

Model	S-35-5	S-35-12	S-35-15	S-35-24
DC output voltage	5V	12V	15V	24V
Output voltage rang(Note:2)	±2%	±1%	±1%	±1%
Rated output current	7A	3A	2.4A	1.5A
Output current range	0-7A	0-3A	0-2.4	0-1.5A
Wave and noise(Note:3)	75mVp-p	100mVp-p	101mVp-p	100mVp-p
Inlet stability(Note:4)	±0.5%	±0.5%	±0.5%	±0.5%
Load stability(Note:5)	±1%	±0.5%	±0.5%	±0.5%
DC output power	35W	36W	36W	36W
Efficiency	70%	76%	78%	78%
Adjustale range for DC voltage	+10,-5%	+10%	+10%	+10%
Input current	0.5A/115V 0.25A/230V
AC Inrush current	Cold-start current 15A/115V 30A/230V
Leakage current	<0.5mA/240VAC
Overload protection	105%~150% Type: pulsing hiccup shutdown Reset: auto recovery
Temperature coefficient	±0.03%/°c(0~50°c)
Setup, rise, hold up time	200ms, 100ms, 30ms
Vibration	10-500Hz, 2G 10min,/1cycle, Period for 60min, Each axes
Withstand voltage	Input and output internal 1.5KVAC, Input and enclosuer 1.5 KVAC, Output and enclosuer 0.5 KVAC
Working temperature and humidity	-10°c~+60 °c,Refer to output derating curve, 20%~90% RH
Store temperature and humidity	-20°c~+85°c, 10%~95%RH
Weight	0.4Kgs
Satety standards	Meet UL 1012 requirement(Not apply for the mark)
EMC standards	Meet FCC aprt 15 J Conduction class B
Note:                                                                                                                                                                                                                                                               1. The testing condition for the parameter above is: 230VAC input, rated load, 25°c 70%RH.Temperature.2. Error. include the setting error, line stability and load stability. (Note:5)3. Wave test: adopting "A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting.4. Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage.5. Load stability test: The load is from 0% to 100%.6. Total output canbe maximum Current, total load can not exceed the maximum output power.

35W switching power supply (S-35-5)