Ads by Google
400W Single Output Switching Power Supply
AC inputProtections: Short circuit/Over load/Over voltageForced air cooling by built-in DC fanPWM control and regulatedBuilt-in cooling Fan ON-OFF control100% full load burn-in testLow cost
12V | 15V | 24V | 27V | 48V | |
33A | 26.5A | 16.6A | 14.8A | 8.3A | |
0 ~ 33A | 0 ~ 26.5A | 0 ~ 16.6A | 0 ~ 14.8A | 0 ~ 8.3A | |
396W | 397.5W | 398.4W | 399.6W | 398.4W | |
150mVp-p | 150mVp-p | 150mVp-p | 200mVp-p | 240mVp-p | |
10 ~ 13.2V | 13.5 ~ 18V | 20 ~ 26.4V | 26 ~ 32V | 41 ~ 56V | |
±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |
±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
200ms, 50ms, 20ms at full load | |||||
180 ~ 264VAC (110VAC input can be custom-made) | |||||
47 ~ 63Hz | |||||
73% | 78% | 81% | 82% | 83% | |
6.5A/115VAC 4A/230VAC | |||||
25A/115VAC 50A/230VAC | |||||
<3.5mA / 240VAC | |||||
105 ~ 135% rated output power | |||||
Protection type: Hiccup mode, recovers automatically after fault condition is removed. | |||||
5.75 ~ 6.75V | 18 ~ 21V | 27.6 ~ 32.4V | 33.7 ~ 39.2V | 57.6 ~ 67.2V | |
Protection type : Hiccup mode, recovers automatically after fault condition is removed. | |||||
-10 ~ +60ºC (Refer to output load derating curve) | |||||
20 ~ 90% RH non-condensing | |||||
-20 ~ +85ºC, 10 ~ 95% RH | |||||
±0.03%/ºC (0 ~ 50ºC) | |||||
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes | |||||
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||||
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC | |||||
233.7K hrs min. MIL-HDBK-217F (25ºC) | |||||
262*105*65mm (L*W*H) | |||||
1.16Kgs/pcs, 12pcs/15.12Kgs/0.0286CMB | |||||
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance: includes set up tolerance, line regulation and load regulation. |
400W Single Output Switching Power Supply