Ads by Google
CNC Compression Spring Machine (XD-CNC226)
We are proud of its successful appearance for this machine is based on our advancing technology,market research and hard work of many years.Every part and stracture of it have been designed and installed carefully.it is able to make various types of springs and wire forming products within wire diameter from 1.0mm to 3.0mm.
Feature
1)Easy to operate and maintain
2) Equipped with the computer-controlled system imported from Taiwan and motor imported from Japan.
3) It is suitable for produce double torsion spring, straight spring, pagoda-shaped, compression
4)with wire feeding device
5)provide satisfied after-sale service
Main Technique Parameter
| Model | XD-230 |
| wire diameter | 1.0--3.0mm |
| Max.O.D. | 50mm |
| Max Production Speed | 250pcs/min |
| Feed Length | Unlimited |
| Feed Speed | 1350m/min |
| Feed (Y)Axis(kw) | 3.8kw |
| Cam (Y)Axis (kw) | 2.7kw |
| Machine Dimensions | 120*120*170cm |
| Wooden Case Dimensions | 130*130*185cm |
| Machine Weights | 1200kgs |
| Gross Weighs | 1300kgs |
| Power | 220V 3P 50/60Hz |
Spring samples
Wire feeding system
To maintain the cleanliness of feeding servo motor to prevent oil and gas, and dust fall into the servo motor or encoder, resulting in mechanical damage.At least every six months for maintenance, or in accordance with the number of machine production, and replace the line feed operation at the same time.Implementation of machine maintenance jobs, follow these steps:
1. Make sure the power is turned off.2. Wipe the parts with cotton cloth, wire feed wheel, sending Line Block, delivers the spindle and other metal surfaces, removal of the mechanical surface debris, oil, grease, dust, and coated with a of antirust thin oil to prevent mechanical corrosion.With the cotton swab to remove the old grease and oil stains on the wire feed drive gear.
3. The transmission tooth gear train gear contact face spreads the gear special-purpose oil lubrication.(Uses OMEGA73 or same level lubricating oil) Attention: Please do not use the air spray gun to be clean, in order to avoid the detritus, the dust fall the slide rails sliding way or in the rotation structure gap
CNC Automatic Compression Spring Machine (XD-CNC226)