100W Single Output Switching Power Supply *High efficiency,low cost power supply *4.2a 24v,8.5A 12v switch power supply

100W Single Output Switching Power Supply

SPECIFICATIONS       INPUT   Voltage Range 88~132 VAC/176~264VAC 47~63 Hz;selected by switch 248~370VDC AC Current 3.15A/115 V 1.5A/ 230 V Efficiency 76%(LS-100F-5);      78%(LS-100F-7.5);    80%(LS-100F-12);    81%(LS-100F-15);83%(LS-100F-24);    83%(LS-100F-27);     84%(LS-100F-48); Inrush Current Cold start 30A/115V 60A/230V Leakage Current smaller than 1 mA/240VAC     OUTPUT See Datasheet     PROTECTION   Over Load 135%~165%   Protection type: Shut down o/p voltage, recovers automatically after fault condition is removed. Over Voltage 115%~135%   Protection type: hiccup mode, recovers automatically after fault condition is removed.     ENVIRONMENT   Working Temp., Humidity -10°C~+60°C;20%~90 %RH Storage Temp., Humidity -20°C~+85°C;10%~95 %RH Vibration 10~500Hz,2G 10min./1cycle,period for 60 min, each along X, Y, Z axes     SAFETY   Withstand Voltage I/P-O/P: 3KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC Isolation Resistance I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC     STANDARD   Safety Standard Design refer to UL1012TUV EN60950 EMC Standard Design refer to EN55022,EN61000-3-2,-3;EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024     OTHERS   Weight 0.65Kg Packing 20pcs/14.2Kg/0.72CUFT     NOTE 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.   2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ &47μ   parallel capacitor.   3.Tolerance: includes set up tolerance, line regulation and load regulation   4.The power supply is considered a component which will be installed into a final equipment. The final equipment must    be re-confirmed that it still meets EMC directives.     OUTPUT

Model LS-100F-5 LS-100F-7.5 LS-100F-12 LS-100F-15 LS-100F-24 LS-100F-27 LS-100F-48 DC Voltage 5V 7.5V 12V 15V 24V 27V 48V Voltage Tolerance ±2% ±1% ±1% ±1% ±1% ±1% ±1% Rated Current 20A 13.5A 8.5 6.7A 4.5A 3.5A 2.2A Current Range 0-20A 0-13.5A 0-8.5A 0-6.7A 0-4.5A 0-3.5A 0-2.2A Rated Power 100W 101W 102W 100.5W 108W 94.5W 105.6W Ripple & Noise 100 mVp-p 125 mVp-p 125 mVp-p 125 mVp-p 150 mVp-p 150 mVp-p 150 mVp-p DC Adjustment Range ±10% ±10% ±10% ±10% ±10% ±10% ±10% Setup,Rise,Hold Time 1s,30ms,15ms at full load

100W Single Output Switching Power Supply