Model : DB-JP-27 (both sequins and beads can be run in this device)
2.5mm pink rice beads 2.5mm browm rice beads
2.5mm white rice beads 2.5mm red rice beads
3mm/5mm yellow jewel beads 3mm/5mm white jewel beads 3mm/5mm multicolour color jewel beads
(1) : Use funtion
1.It adopts the combination of straight bearing,guiding rod shaft and pneumatic element to control up and down of device.
2.The special steel guide groove can change the specification between different sequins and beads easily.
3. Needle position in front, back, left and back direction can be adjusted , which makes the operation convenient.
4.The use of flat sequins and concave sequins will achieve the best effect.
5.The device can be installed in the normal embroidery machine or high-speed embroidery machine.
6. The special spicifation of sequin can be used such as: ¢11mm,12mm,18mm,20mm.
7.The specifation of the beads :2.5mm of rice beads, 3mm and 5mm of jewel beads
8.The device is installed in the front(the initial needle position or the end needle position)
(2) : Technical parameters
1.Space of sequin device: 50mm
2.Lifting traveking: 70mm
3.Sequin embroidery speed:
¢ 3mm --- 4mm --- ¢ 5mm 1000 r / min
¢ 6.75mm----- ¢ 9mm 800 r / min
4.Specification of sequin: ¢ 3mm, 4mm, ¢ 5mm, ¢ 6.75mm, ¢ 9mm,
5.Specifications of stepping motor: 0.5A or 1A
6.The use of air pressure: 3kpa
Front single sequin device( bearing back press presure bar full-guiding type)