Welcome to ECVERY
Reverse side single sequin device
Reverse side single sequin device
Supplier Info
[China Supplier]
Contact Person : Mr. Zhang Paul
Tel : 86-577-86139880
Fax : 86-577-86139886
Product Detail
Reverse side single sequin device

 Model : DB-JP-17 

(1):Use funtion

        1.It adopts pneumatic components and straight guide rail to contral up and down of the device.

        2.The special steel guide groove can change the specification between different blades easily.

        3.The use of flat piece and concave piece will achieve the best effect.

        4.The device is installed in the reverse side and  fit to installed in the machine of short head space (the initial needle position or the end needle position).

(2):Technical parameters

        1.Space of sequin device: 60mm

        2.Lifting traveking: 30mm

        3.Sequin embroidery speed:

               ¢ 3mm --- 4mm --- ¢ 5mm        1000 r / min

               ¢ 6.75mm                                     800 r / min

        4.Specification of sequin: ¢ 3mm, 4mm, ¢ 5mm, ¢ 6.75mm

        5.Specifications of stepping motor: 0.5A or 1A 

        6.The use of air pressure: 3kpa

Reverse side single sequin device

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.