Model : DB-JP-24
1.It adopts pneumatic components and straight guide rail to contral up and down of the device.
2.The special steel guide groove can change the specification between different blades easily.
3.The special-made rod is used to stop sequins. The pressure of rod can be adjustedm which makes the surface of sequins no harm .
4.The device is only installed in high-speed embroidery machine.
5.The use of flat sequins and concave sequins will achieve the best effect .
6.The device is installed in the side(the initial needle position or the end needle position).
1.Space of sequin device: 95mm
2.Lifting traveking: 26mm
3.Sequin embroidery speed:
¢ 3mm --- 4mm --- ¢ 5mm 1000 r / min
¢ 6.75mm----- ¢ 9mm 800 r / min
4.Specification of sequin: ¢ 3mm, 4mm, ¢ 5mm, ¢ 6.75mm, ¢ 9mm
5.Specifications of stepping motor: 0.5A or 1A
6.The use of air pressure: 3kpa
Side single sequin device(Guide rail full-guiding type in high-speed embroidery machine)